Combination Electronic Stethoscope 6 Channel Noise detection sensors Kit Instructions

Combination Electronic Stethoscope 6 Channel Use to locate & identify engine noise. 6 Channel Noise detection sensors Kit Use for road test diagnosis, under chassis, under hood and fuel injectors. Do you know how to use 6 Channel Electronic Stethoscope? Below OBD2Tuner.com sharing Combination Electronic Stethoscope 6 Channel Noise detection sensors Kit Instructions.

6 Channel Combination Electronic Stethoscope Kit Mechanic Noise Malfunction Diagnostic Tools For Car Auto Engine Fault Noise Detection


Combination Electronic Stethoscope 6 Channel from obd2tuner.com Description:

Use to locate & identify engine noise
Super sensitive microphone pick-up
Flexible non-conductive shaft
Cushioned headphones

Component of obd2tuner.com 6 Channel Electronic Stethoscope:
Detect & isolate noise components
Enables road test diagnosis
 6 channel sensor selector unit
6 pick up sensors – 4.8m long cords

OBD2Tuner.com 6 Channel Noise detection sensors Kit Use for: ＊road test diagnosis ＊under chassis ＊under hood ＊fuel injectors

The chassis EAR is a versatile electronic listening tool, which is designed to allow the user to listen to amplified sounds through a professional set of headphones during a road test.
There are 6 extremely sensitive microphone/clamps that can be attached adjacent to many difficult to diagnose vehicle parts and 1 extension lead.

OBD2Tuner.com Combination Electronic Stethoscope 6 Channel Noise detection sensors Kit Instructions:

Connect headphone jack into stethoscope unit
Turn unit on with volume control dial & set to mid level
Put headset on & place probe onto part to be tested.
Use to detect & diagnose worn pistons, faulty lifter, bearing & gear noise, manifold leaks – also use to locate wind & water leaks in doors & windscreens.

Component of obd2tuner.com Chassis Electronic Stethoscopes 6 Channel:

Attach 4 or 6 sensor clamps to suspected source of noise
Use either Velcro straps or cable ties to secure the clamp wires.
Plug headphone jack into selector box & turn on with volume control & set to midlevel
Operate component or test drive vehicle to duplicate the problem noise.
Adjust volume to desired level & rotate the selector box knob between the 4 or 6channels, until the source of the noise is isolated.
Use to trace drive-train, under-bonnet & under-dash source of noises.
Stethoscope & 4 or 6 channel selector box require a 9 volt battery – supplied.

For More details information, welcome to Add my Whatsapp (+86 15889512468) or Skype obd2tuner.com) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

OBD2Tuner.com- China OBD2 Tuner Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Contacts:

Website: www.obd2tuner.com
Skype: OBD2Tuner.com
Email: info@obd2tuner.com
What;s app: +86 15889512468