AE100 Automotive Relay Tester For 12V Cars AE100 Car Battery checker User Manual

AE100 Automotive Relay Teste is a quick test tool to test the car relay. 12V Cars AE100 Car Battery checker can let you know the status of the automotive relay. Do you know how to use AE100 Automotive Relay Tester For 12V Cars. Below OBD2Tuner.com sharing AE100 Automotive Relay Tester For 12V Cars AE100 Car Battery checker User Manual. 

AE100 Automotive Relay Tester Tool for 12V Cars Auto Battery checker AE100


OBD2Tuner.com AE100 Automotive Relay Tester for 12V Cars Highlights:

Test three of the most popular relay types
Tester controls the tested relay for proper opening & closing
Tester uses 12V power from car battery. No batteries required: alligator clips (test leads) connect to car battery for power
Quick and easy off the relay test
Light Red LED if the relay tested in abnormal. if NOT light Green LED

OBD2Tuner.com AE100 Automotive Relay Tester For 12V Cars AE100 Car Battery checker User Manual:

1. Connect the power leads to the car battery -- black alligator clip to negative terminal,
red alligator clip to positive terminal.
2. Tester is powered up when the LED illuminates in RED.
3. Check the relay before plugging into the tester. If it’s a 4 pin relay, select “4 pin” on the
tester. If it’s a 5 pin relay, select “5 pin” on the tester.
4. Plug in the relay into one of the three receptacles.
5. Press the “Test” button.
6. Tester will check the pin configuration of the unknown relay. Tester will light the RED
LED if the unknown relay is not the same to the most of common automotive relays or
the pin of the unknown relay is destroyed.
7. Tester will open and close the relay 10 times for testing the time to contacts closure
and opening if the pin configuration of the relay is right. Tester will light the RED LED
immediately if the time is overtime.
8. Tester will check the consistency of the relay after testing the time to contacts closure
and opening ten times. Tester will light the GREEN LED if the test passed, if not light
the RED LED.
9. Disconnect power leads from the car battery and remove relay from the tester.

12V Car Diagnostic Auto Battery checker AE100 from obd2tuner.com Attention:

1. The car battery must be 12V battery, and the voltage of the battery is among
11V--15V.
2. Ideal for coil resistance above 20 ohms.
3. Tester will light the GREEN LED if all passed during the test session, if not light the RED LED.

For More details information, welcome to Add my Whatsapp (+86 15889512468) or Skype obd2tuner.com) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

www.OBD2Tuner.com- China OBD2 Tuner Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Contacts:

Website: www.obd2tuner.com
Skype: OBD2Tuner.com
Email: info@obd2tuner.com
What;s app: +86 15889512468