How To use Autool SDT-202 Car Smoke Leak Detector SDT-202 Diagnostic smoke leakage tester

Autool SDT-202 Car Smoke Leak Detector is New Smoke Leakage Automotive Diagnostic Tool for all pipe systems except EVAP. SDT-202 Diagnostic smoke leakage tester not only support cars smoke leakage test, but also work for Motorcycle, Truck and SUVs. Need Autool SDT-202 Car Smoke Leak Detector User Manual. Below OBD2Tuner.com sharing How To use Autool SDT-202 Car Smoke Leak Detector SDT-202 Diagnostic smoke leakage tester.

Autool SDT-202 Car Smoke Leak Detector Machine SDT-202 Diagnostic Leak Detector for smoke leakage test


OBD2Tuner.com How To use Autool SDT-202 Car Smoke Leak Detector SDT-202 Diagnostic smoke leakage tester:

1.Open the engine cover, and hang obd2tuner.com Autool SDT-202 Car Smoke Leak Detector in the cover.

2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the
other side with a rubber stopple.

3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.

4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.

5.Turn on the power switch, and detector starts to work.

6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

7.After leak detection, please connect well the wires and pipe.

8.Notes:

* Please do leak detection away from smoke-sensitive parts.

* SDT-202 Diagnostic Leak Detector from obd2tuner.com Not suitable for EVAP.

* Do not run the detector over 8 minutes. It needs interval rest.

* The obd2tuner.com SDT-202 Diagnostic Leak Detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.

* The round parts of this detector is with temperature, be careful to avoid scalding injury.

Autool SDT-202 Car Smoke Leak Detector from obd2tuner.com Cautions:

1.When you use this detector the first time, please fill 20-30ml  oil, not beyond this range.
2.New oil can be filled with only when the smoke is light,and it  can`t be filled over 15ml every time.
3.Before filling new oil, please pour out the remaining oil in the  detector.
4.Please replace the detector oil regularly.

For More details information, welcome to Add my Whatsapp (+86 15889512468) or Skype obd2tuner.com) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

www.OBD2Tuner.com- China OBD2 Tuner Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Contacts:
Website: www.obd2tuner.com
Skype: OBD2Tuner.com
Email: info@obd2tuner.com
What;s app: +86 15889512468